communication interface circuit
英 [kəˌmjuːnɪˈkeɪʃn ˈɪntəfeɪs ˈsɜːkɪt]
美 [kəˌmjuːnɪˈkeɪʃn ˈɪntərfeɪs ˈsɜːrkɪt]
网络 通信接口电路
双语例句
- The hardware of system consists of the major loop, control loop, protect loop, communication interface circuit, etc;
硬件设计主要包括主回路、控制电路、保护电路、通信接口电路等电路的设计； - The hardware of POS machine is composed of communication interface circuit of CAN bus, IC card read/ write device, keyboard circuit, display circuit and memory.
窗口机硬件系统主要由CAN总线通信接口、IC卡读写器、键盘、显示和存储器等功能模块组成，软件系统主要由窗口机初始化模块、窗口机监控模块、窗口机按键处理模块等组成。 - Hardware mainly includes the kernel control circuit, man-machine interface circuit, communication interface circuit, urgent circuit, power drive circuit and so on.
其硬件电路主要有：主控电路、人机接口电路、通讯接口电路、应急电路和功率驱动电路等。 - The function of serial communication port in protocol tester was analyzed and a programmable multi-protocol serial communication interface circuit was designed.
分析了网络协议测试仪的串行通信接口功能，设计了一种可编程多协议串行接口电路。 - The hardware section chiefly consists of data collection circuit, export control circuit, keyboard and display interface circuit and hardware design rule and concrete circuit diagram of communication interface circuit.
硬件部分主要包括数据采集电路、输出控制电路、键盘与显示接口电路、通讯接口电路的硬件设计原理和具体的电路图。 - The communication interface circuit with the computer is also designed. The experiment of CCD driving and signal processing circuit shows that the drivers can assort with CCD well, take advantage of the characteristic of CCD photoelectric transition and output steady and reliable electric signal.
对CCD驱动及视频处理电路进行了试验，结果表明驱动电路能很好地与CCD配合，充分发挥CCD光电转换特性，输出稳定可靠的电信号。 - This paper introduces the composition of the DCS system, elaborates the concrete conditions of the temperature patrol instrument and at the same time describes its communication interface circuit.
介绍了一种分散控制系统（DCS）的组成，详述了温度巡检仪的具体情况，同时也描述了通信接口电路。 - In this text, the NC system control program, communication interface and circuit diagram designed by self are released, which combine with CNC ISO standard.
本文给出了结合现行数控系统通用规范而自行开发设计的数控系统控制程序、通讯接口及硬件电路。 - Finally, based on the deeply research on the realization process of fuzzy control system for gas boiler, system hardware and software are designed in the paper, especially communication protocol and interface circuit on system.
最后，文章对燃气热水锅炉控制系统的具体实现过程进行了研究，对下位机硬件和软件进行了设计。 - Design of the Wireless Communication Interface Circuit and Program
计算机无线通信接口电路及程序设计 - In part of hardware design, voltage and current sampling circuit, IGBT driving circuit communication and man-machine interface circuit are designed.
在硬件设计中对电压、电流采样电路，IGBT驱动电路以及通讯和人机接口电路进行了设计。 - Hardware circuit design of DSP and FPGA, communication interface circuit and configuration scheme of FPGA are emphasized as well as DSP routine flow.
详细讨论了DSP和FPGA的硬件设计，通信接口以及FPGA的配置方案，并介绍了DSP的程序流程。 - FPGA Implementation of Special Synchronous Serial Communication Interface Circuit
专用同步串行通信接口电路的FPGA实现 - This paper explains the principle and the hardware design of a new type infrared gas analysis equipment. It includes the design of the light source, photoelectric detector, ADC, DSP system, liquid crystal display module and serial communication interface circuit.
本文阐述了一种新型的红外气体分析装置的工作原理和电路设计，它包括光源、光电探测器、模数转换、DSP系统、液晶显示模块和串行通信接口等部分的设计。 - It introduced an infrared communication interface circuit based on IrDA standard. The program of the measurement instrument was designed.
设计了一种符合IrDA标准的红外通讯接口电路。 - Communication interface circuit; setting circuit of baudrate and address.
通讯接口电路以及波特率、地址设置电路。 - Communication Interface Circuit for Microcomputer and Single Chip Microcomputer
微机与单片机通讯接口电路蔡氏电路混沌同步保密通讯 - This paper introduces an design method of dual-system computer communication, The design method using dual-ports SRAM is introduced which makes the internal and external communication interface circuit of multiple systems simple, efficient and powerful.
阐述了一种双系统微机通信的接口设计方案，介绍采用双端口SRAM为主存储体的系统信息共享的线路设计方法，该方法使得多系统微机内外通信的接口线路简捷高效、功能强大。 - Thirdly, it gives a detail about the hardware and the circuit ( single-chip, communication interface circuit, sign input channel and analogous circuit).
第三，详细阐述了系统的各硬件模块电路（单片机系统、通信接口电路、信号输入通道、模拟电源）组成。 - Based on this approach, communication interface circuit of CAN bus and MCU, communication protocol and data format are introduced. In the end system hardware circuit of CAN node and program design techniques are advanced.
以该方法为基础，设计了CAN总线与单片机之间的通信接口电路、通信协议、数据帧格式，最后基于CAN总线通信的楼宇集中控制器和多用户CAN节点的硬件电路以及软件设计技术。 - The computer wireless communication interface circuit and program consisted of single chip transmitter TX6000, single chip receiver RX6000 and interface IC MAX232A are introduced in this paper.
文章介绍了一种采用TX6000单片发射器芯片、RX6000单片接收器芯片和MAX232A接口芯片构成的计算机无线通信接口电路及程序。 - The hardware developing mainly includes designing of control circuit, driver circuit, signal sampling circuit, communication interface circuit and the protecting circuit.
硬件开发内容主要包括有控制电路、驱动电路、信号采样电路、通信接口电路以及检测保护电路等的设计。 - The whole test system includes AC source, signal acquisition and regulate circuit, LED electronic load, ARM control circuit, LCD interface circuit, switching value circuit and communication interface circuit.
整个测试系统包括交流源电路、信号采集与调理电路、LED电子负载电路、ARM处理器控制电路、液晶显示接口电路、开关量接口电路和通信接口电路。 - The functions of human-computer interaction, image display and data storage are completed by the second part, including controller circuit, memory expansion circuit, extended keyboard interface circuit, display driver circuit, real-time clock circuit, extended communication interface circuit and power circuit.
控制与显示模块完成人机交互、图像显示和数据存储等功能，包括控制器电路、存储器扩展电路、键盘接口扩展电路、显示器驱动电路、实时时钟电路、通信扩展接口电路和电源电路。 - Multi-communication interfaces are designed in the serial communication interface circuit.
串行通讯接口的多路设计，提高了串行通讯电路的灵活性及稳定可靠性。 - Hardware design, including the designs for power inverting circuit, master control circuit, auxiliary power circuit, signal acquisition and processing circuit, communication interface circuit and so on.
离网型逆变器硬件电路设计，包括功率逆变电路、主控电路、电源电路、采样调理电路、通讯接口电路设计。